메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김상기 (전북대학교) 양성모 (전북대학교) 유효선 (전북대학교) 강희용 (전북대학교) 박정은 (전북대학교)
저널정보
한국자동차공학회 한국자동차공학회 춘계학술대회 2010 KSAE 부문 종합학술대회
발행연도
2010.5
수록면
1,005 - 1,010 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Most of the structural analysis are tested under uniaxial stress or small punch test. but there are also need to inverse problem to study relationship of these. The focus of this paper is to investigate the relationship between the small punch creep test and uniaxial creep test by inverse problem tool. Specimen is adopted 9Cr1MoVNb steel. Creep test were performed using a SP-Creep test at constant loads and high temperature conditions. To find the relationship of Uniaxial creep, FEM were also conducted at the same condition of SP-Creep test. From the basis of relationship of test results, the optimum size of specimen and inverse problem validity were determined. The last, creep life is predicted by using the modified power law.

목차

Abstract
1. 서론
2. 역문제법을 이용한 SP-Creep과 Ten-Creep 시험의 상관성
3. 수명예측
4. 결론
후기
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-003107653