지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한양대학교 세라믹공정연구센터 Journal of Ceramic Processing Research Journal of Ceramic Processing Research Vol.25 No.1
- 발행연도
- 2024.2
- 수록면
- 97 - 103 (7page)
이용수
초록· 키워드
오류제보하기
In this study, It was aimed to produce Ti martis Electroless Ni coated ZrO2 ceramic powders added composites and to revealthe properties of the produced composites by characterizing them. It was preferred to use ceramic-metal powder electrolessnickel plating method in sample preparation. While ZrO2, known for its biocompatibility, was chosen as the reinforcementmaterial, Titanium (Ti) powders were preferred as the matrix powder. Different compositions were studied in the experimentalphase of the Ti martis Electroless Ni coated ZrO2 ceramic added. After these compositions were prepared, a conventional (tube)oven was used for sintering processes. The sintering temperature was chosen as 1100ᵒC in the tube furnace. After sintering, thesamples were examined mechanically, physically and metallographically. SEM-EDX, XRD analyzes and Vikers hardness testswere applied to characterize the produced composites. Additionally, the densities of the produced composites were calculated
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Preparation and characterization of zirconia ceramics with oxides addition
Journal of Ceramic Processing Research
2021 .01
-
The influence of firing temperatures on the phase formation, microstructure and mechanical properties of alumina zirconia composite ceramics
Journal of Ceramic Processing Research
2024 .02
-
Electrochemical performance of Ni-P-Carbides electroless composite coatings
한국표면공학회 학술발표회 초록집
2018 .11
-
Effect of ultrasonic on morphology and hardness of Ni-P-Al₂O₃ electroless composite coatings
한국표면공학회 학술발표회 초록집
2017 .11
-
Preparation of Al2O3-ZrO2 composite powder by co-precipitation method in an alcohol-water solution and its sintering behavior
Journal of Ceramic Processing Research
2016 .11
-
내식성 향상을 위한 마그네슘합금의 ZrO₂ 적용 레이저 표면처리
한국기계가공학회지
2016 .08
-
Si 분말상의 무전해 Ni-B 도금
한국표면공학회 학술발표회 초록집
2015 .11
-
Comparison of Deposition Behavior and Properties of Cyanide-free Electroless Au Plating on Various Underlayer Electroless Ni-P films
한국표면공학회지
2022 .08
-
A Study on Synthesis of Ni-Ti-B Alloy by Mechanical Alloying from Elemental Component Powder
한국분말야금학회지
2016 .01
-
FABRICATION OF ZrO2-BASED NANOCOMPOSITES FOR TRANSURANIC ELEMENT-BURNING INERT MATRIX FUEL
Nuclear Engineering and Technology
2015 .01
-
Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders
한국분말야금학회지
2018 .01
-
Tantalum Carbide reinforced electroless Ni-P composite coating
한국표면공학회 학술발표회 초록집
2019 .11
-
Synthesis and Characterization of Ti50Ni(50−X)FeX Alloy Produced by Mechanical Alloying and Pressure-Less Sintering
Metals and Materials International
2023 .04
-
Microstructural and Mechanical Properties of TiCX–Ni3(Al,Ti)/Ni Functionally Graded Composites Fabricated from Ti3AlC2 and Ni Powders
Metals and Materials International
2020 .01
-
치과보철용 Ni-Cr-Ti 소결체합금의 포셀린결합력 및 기계적 특성
한국표면공학회지
2016 .12
-
비시안 무전해 Au 도금의 석출거동에 미치는 하지층 무전해 Ni-P 도금 조건의 영향
한국표면공학회지
2022 .10
-
Wear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubes
Journal of Ceramic Processing Research
2020 .01
-
무전해 도금을 이용한 Si 태양전지 Ni-W-P/Cu 전극 형성
한국표면공학회지
2016 .02
-
Investigation on High Temperature Mechanical Behaviors of TiC-γ′ Reinforced Ni Composite
Metals and Materials International
2021 .01
-
Standardization of electroless and electroplating Ni-Ceramic composite coatings: Interface, corrosion and tribological behaviors
한국표면공학회 학술발표회 초록집
2021 .12
최근 본 자료
댓글(0)
0